Store

Seat slide rails, locking

Part# 1350

Left and right locking seat slide rails with 15 positions.
Variant price modifier:
Base price with tax
Salesprice with discount
$29.95
Discount
Tax amount
Price / kg:
Description

Left and right locking side rails for one seat, (wire connector clip #1349 sold separately).

Using the standard slider clip, the track width (bolt pattern) is approximately 12", with some variability options depending on which rail holes the clip is connected to. For narrower or wider applications, you can produce a custom clip. The purpose of the clip is to simultaneously allow the non-handled rail to also be disengaged by the rail with a handle, when repositioning the seat.

  • On each rail, the seat bolt holes are 11.5" center to center.
  • Slide travel is 7.5", with 15 incremental locking positions.
  • Each rail has two pre-installed threaded studs located 11" from the center of one bolt, to center of the other. These studs are 1" long and generally point downward to the mounting surface.
  • 15.75" = fully extended rail length (outer-most dimension), not including handle.
  • 22" = fully extended rail length (outer-most dimension), including the stock untrimmed handle.
  • 12.5" = fully retracted rail length (outer-most dimension while in center position), not including handle.
  • 18.75" = fully retracted rail length (outer-most dimension while in center position), including the stock untrimmed handle.

Both slider rails together weigh 3 lbs.