Store


Controller, Alltrax 24-72V, 300A (AXE7234P/0-5K), Fuse included

Part#: 1691

PROGRAMMABLE, 0-5k ohm throttle input, 1/2 speed reverse option.
Variant price modifier:
Base price with tax
Salesprice with discount
$580.00
Discount
Tax amount
Price / kg:
Description

 

FEATURES:

  • programmable, with easy to use radio buttons and slider bars interface, no code to write or edit. (see screen shot example below)
  • The controller may be used as-is, without any programming.
  • Solid state pulse width modulated technology
  • 0-5K ohm throttle input
  • Weight=5.5lbs

 

SUGGESTED WIRING:

  • If used with a Permanent Magnet motor, connect the controller "B+" terminal to both the "Battery +", and the positive terminal at the motor. And connect the controllers "M-" terminal to negative post on the Motor.
  • It is not necessary to use the "1/2 speed reverse" option shown. When powered with 12V, this connector cuts the controller power to 50%. It does not cause polarity outputs to the motor to reverse! To reverse power to the motor, additional power wire switching must be added by the user (externally from the controller) with a mechanical, or solenoid/contact switching.

 

PROGRAMMING INTERFACE SCREEN SHOT:

*To program the controller from a PC, the Alltrax-to-PC interface cable (sold separately) is required.